JFP Guitars

Sonoran LFT SB Single Cutaway: "Quilted Maple / Pine"

This particular handsome instrument is a Sonoran LFT SB Single Cutaway copy of a Telecaster, with great tone, action and sustain.

The specifications are:

  • 7 pounds 14 ounces

  • Pine body with Quilted Maple face plate, and Hard Rock Maple neck

  • Bolt-on "Mighty Mite" neck: Hard Rock Maple, with an inlaid "skunk stripe" down the back, single action truss rod

  • Maple fingerboard, 25.5 inch Fender scale length,  9.5 inch radius

  • Neck thickness, not including fret: 0.86" at 1st fret, 0.88" at 6th fret, 0.89" at 12th fret

  • General Products water-based clear lacquer body and faceplate; Mighty Mite clear satin polyurethane neck and fingerboard

  • Gotoh tuners

  • Stewart MacDonald through-body hard tail

  • Stewart MacDonald "Golden Age" Bridge Pickup for Tele:

    • Pole pieces: Alnico 5 magnets with north polarity and 2-1/8" (53.97mm) spread

    • Vintage-spec raised D and G pole pieces

    • Coil wire: AWG42, wound to 6.5K ohms. Vintage-style white string wrap. Wax-potted

    • Flat work: Bottom thickness .093" (2.38mm), top .062" (1.57mm). Copper-plated steel baseplate for authentic twang

  • Stewart MacDonald "Golden Age" Neck Pickup for Tele:

    • Pole pieces: Alnico 5 magnets with south polarity and 1-15/16" (49.21mm) spread

    • Coil wire: AWG43, wound to 7.0K ohms for original beefier output. Wax-potted

    • Flat work: .062" (1.57mm) top and bottom thickness

    • Cover: '50s-style flat-topped, chrome

  • 3 way selector switch: neck, neck plus bridge, bridge

  • Common volume and tone controls

  • Unbleached bone nut

  • Single-action truss rod with a 4mm Allen key adjusting nut at the peghead

  • D’Addario EXL110 nickel wound 10 / 46 strings​