JFP Guitars

This beautifully looking and great sounding instrument is a Sonoran LFT SHB Single Cutaway copy of a Fender ’72 Vintage Thinline Telecaster

​The specifications are:

  • 7 pounds 7 ounces
  • Black Limba chambered (semi-hollow) body with Walnut face plate
  • Bolt-on Hard Rock Maple neck
  • Rosewood fingerboard, 25.5 inch Fender scale length,  contoured from 10" at the nut, to 13" at the 12th fret, to 14-1/2" at the 22nd fret​
  • Neck thickness, not including fret: 0.86" at 1st fret, 0.89" at 6th fret, 0.97" at 12th fret
  • General Products water-based clear lacquer body, faceplate and neck; oiled fingerboard
  • Seymour Duncan Custom Shop “Wide Range Humbuckers”
    • A modern recreation of the Fender ’72 vintage Telecaster “Wide Range Humbucker” (WRHP) that will work for almost any style of music
    • 11.1 k-ohm neck, 11.2 k-ohm bridge
    • An Alnico 5 bar magnet and a special coil wind give it a glassy treble response and full, tight bass, while scooped mids help each note to sing clearly even under extreme high gain – or even more extreme speed
    • ​​With its hot coils, and alnico 5 bar magnet, this pickup delivers an unmistakable upper midrange attack, a tight, articulate low end, and harmonically rich highs that can really sing​
  • 3-way switch: neck, neck plus bridge, bridge
  • Common volume and tone controls
  • ’72 vintage through body hardtail
    • 2-7/32 inch string spread
    • HighwoodTM HG contoured vintage S-type saddles
    • Saddles have an overall radius of 16"​
  • Gotoh Magnum Lock-Trad 6-In-Line Tuners
  • Unbleached bone nut
  • Double-action truss rod with a 4mm Allen key adjusting nut at the peghead
  • D’Addario EXL110 nickel wound 10 / 46 strings

Sonoran LFT SHB Single Cutaway "Walnut / Black Limba"