This particular instrument is a handmade Sonoran SG STD SB Double Cutaway with a thin 1.25 inch Black Limba body

The specifications are:

  • 7 pounds 11 ounces
  • Solid 1.25 inch thick Black Limba wood body and Maple neck
  • Rosewood fingerboard, 24 9/16 inch Gibson scale length, contoured 12 inch
  • Neck thickness, not including fret: 0.83" at 1st fret, 0.86" at 6th fret, 1.01" at 12th fret
  • Water-based Red / Brown lacquer neck and body; oiled finger board
  • Set neck
  • Gotoh Magnum Lock-Trad 3+3 tuners with keystone knobs, chrome
  • Gotoh tune-o-matic bridge and stop tailpiece, chrome
  • Seymour Duncan 59/Custom Hybrid pickups mounted in an SG Standard pickguard
    • A harmonically rich hybrid humbucker that uses one coil from the 59 Model bridge and one coil from the higher output Duncan Custom model
    • Hand built in Santa Barbara, CA, the 59/Custom Hybrid uses mismatched coils and an alnico 5 bar magnet
    • The 59/Custom Hybrid is a medium output, gritty sounding humbucker that sparkles with upper midrange harmonic content
    • The mismatched coils, and the alnico 5 bar magnet keep the low end nice and tight, and give the mids a grind that is perfect for hard rock and metal; plenty of crunch and bite on top as well
  • 3 way selector switch: neck (“rhythm”), bridge plus neck, bridge (“treble”)
  • Separate volume and tone controls for neck and bridge
  • "ZeroGLIDE" nut
    • Borrows the "zero fret" concept to reduce string contact in the nut by up to 93%
    • Increases tuning stability, playability, and open string tone
  • Dual action truss rod
  • D’Addario EXL115 nickel wound 11 / 49 string

  • Grover Quick Release strap locks and brown woven strap

Sonoran SG STD SB Double Cutaway: "Black Limba"

JFP Guitars